Weendend Update 1

I mounted the rockler bearing on the top ring. I had mounting holes on the top ring, but they got in the way of the shoulder hubs and the large data port. I had to drill out the other holes on the outer bearing and drill new holes in the top ring. I then tapped the ring and reassembled. This should be the last time the frame needs to be taken apart for some time.

I also filed down the last ankle wedge. These things just didn't line up at all. I don't really think the wedges are the problem. I think there were some issues in the production of the ankles where some durfaces are not completely flat and the angles are off.

I have a few thing on my list to try and get done this weekend. Ipdates and pictures coming...