First thing I had to do was check to see if the Coin slots fit the skins. A dry fit showed that they did not. I tested the openings to see which areas needed to be filed. After the openings were widened, I marked the location on the frame rings to be cut. A notch had to be made to allow the coin slot strip to sit in it's proper place. After The marks were made, the dremel came out. A test fit and adjustment later, everything fit. I just have to mount the strip to the inner skins and they are done.
WonderCon 2024 - Day 3
-
WonderCon Day 3 at the Anaheim Convention Center. Come for the donuts, stay
for the convention.
Once again, no droids were stolen overnight; they were i...
3 weeks ago
No comments:
Post a Comment