After the back door was cut I started removing panels. The first panels to be removed were the two large side doors in the back. I slipped my hacksaw into the slot and took out each tab holding the panel on. After the panel was detached I filed the tabs smooth. A quick clean up with acetone, the JB Weld was mixed up. The JB Weld was applied to the edge of the inner panel and then mated to the outer panel. Large black binder clips were used to hold the pieces together while the JB Weld hardened.
UPCOMING APPEARANCES: San Diego ComicCon - Mouse droid builders panel Friday 6 pm, room 7AB R2 builders panel Sunday Noon, room 11 Hope to see you there!
5 days ago