I had a few panels on the skins pop off, so I cleaned them up and re JB Welded them on.
i also took the frame apart and looked at the large data port slot. Thsi slot need to be cut to allow the piece to sit further back. I took the top most horizontal piece off the Utility Arm carrier and then put the LDP into the opening. I clamped the LDP ontot he top ring and marked the cut. I now just have to cut the frame. Looks like it is time for reciprocating saw to come out.
Cerritos Library Presentation
-
Our most recent library presentation was a special one, because it was in
the city Mike grew up in: Cerritos. Some of his local family members came
to he...
1 week ago
No comments:
Post a Comment