Ok so now a test with the PSIs. This is a lit room, and the camera exposure adjustment is going a little crazy causing some weird color transitions that aren't there in person.
Update:
The color transitions are are fade the color switches immediately using a different command.
The tube is a resin on from Keith. The the filters are pieces of milks jugs. There are 2 inside the tube and the one that is being held is the rough part, usually at the handle. The color test is the same test routine as was done with the holoprojectors. The tube is open at the back and the inside should be lined with aluminum tape to improve the lighting effect. There is a little bit of a hot spot, not as much as it appears in the video, but if the LED is moved further away it goes away without any decrease in the lighting
R2LA 2025
-
Our 19th R2LA, a gathering of Star Wars droid builders, was a huge success.
Could not have pulled it off without the help of our kids, and all the
droid ...
3 weeks ago
No comments:
Post a Comment